The Station Master Pro is a battery-operated irrigation system diagnostic tester combining solenoid activation and wire identification.
LEDs indicate if sufficient voltage is being supplied by the controller and the condition of the solenoid. The solenoid activation mode is used to activate valve solenoids either from the controller or at the valve, along with testing continuity of the solenoids. Chatter mode assists in locating the valve by ear. Tone generator helps identify wires when combined with inductive probe. The test leads allow the technician to connect the unit without cutting or stripping the wires.
Introducing the Tempo 551™ Advanced Underground Locator – the Professional Grade, All-in-One Location Solution.
Designed for professionals and packed with advanced features, the 551 brings you everything you want in a Locator including; dual simultaneous frequencies, Peak & Null receiver, and IntelliTrack™ digital noise rejection.
The proprietary IntelliTrack™ digital noise rejection technology offers signal clarity in noisy environments to give you an effortless locating experience that’s smarter, faster, and more accurate.
Connect to any type of wire, use our inductive clamp or transmitter antenna when a direct connection is not available. You can also choose between peak/null modes or between two simultaneous frequencies while in the field, always ensuring optimal signal performance and enabling side-by-side comparison to better detect and characterize anomalies.
And if you often locate near AC lines or change transmitter frequencies the 551 cable locator offers IntelliTrack™ digital noise rejection technology, so you can reliably trace lines near power sources. If AC interference is an issue, the 551 will give you two unique options for tracing without needing to walk back to the transmitter. Select Passive Mode to detect the source of the noise.
Whether you’re tracing electrical lines, irrigation wires, telecom cables, metal pipes, or Sondes (33 Khz) this rugged, IP54-rated underground wire locator is built for performance. The 551 can trace utility lines over a mile (1.6 km) and locate them at depths exceeding 2 feet (6 m). It can also triangulate depths up to 10 feet (3m). With an ergonomic, lightweight receiver and a rugged case, the 551 delivers reliability, efficiency, and ease of use at an affordable price.
It’s here! The true RMS Milliamp Clamp Meter you’ve been looking for. Choose the Tempo Communications CMA-360B Pro Milliamp Clamp Meter for testing and troubleshooting leakage on 2-wire irrigation system wiring, traditional irrigation system wiring, pump wiring, landscape lighting, and a wide variety of electrical applications.
CMA-360B excels at checking for leakage or diagnosing outdoor lighting and irrigation circuit troubles, so you can stay on top of potential issues. The handy Auto-Range function takes the guesswork out of the equation; simply set the appropriate position on the milliamp meter dial and easily test AC volts, DC volts, AC Current, AC Milliamp current (leakage), or Ohms.
True RMS can measure alternating current (ac) or ac voltage. The CMA-360B milliamp meter gives the user the ability to obtain accurate results in “dirty” power conditions, like measuring the current draw of a pump motor. The combination of the True RMS with resistance measurement up to 600k Ohms, and the current measurement resolution to 1/1000th of a milliamp (one microamp), provides the ability to find troubles other meters may miss.
A clamp meter measuring into the milliamps is a necessity in today’s growing 2-wire irrigation system market, and now you’ve found the best milliamp meter available today!
£44.75–£58.60Price range: £44.75 through £58.60 ex. VAT
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.